半格分次弱Hopf代数的$G$-Cleft扩张

本文首先将Clifford幺半群代数分解为交叉积的半格直和,然后将这个结果通过$H$-$G$-cleft扩张推广到所谓的$G$-交叉积上.     

Filiform李代数Q_n的Hom-结构

首先证明了有限维Z-阶化李代数上的一个线性算子是Hom-结构的充分必要条件,即它的每个齐次分支也是Hom-结构.然后计算了特征零代数闭域上一类有限维Z-阶化Filiform李代数Qn的齐次Hom-结构,从而决定了Qn的所有Hom-结构.     

Hochschild and cyclic (co)homology of superadditive categories

We define the Hochschild and cyclic (co)homology groups for superadditive categories and show that these (co)homology groups are graded Morita invariants. We also show that the Hochschild and cyclic homology are compatible with the tensor product of superadditive categories.     

In situ X‐ray data collection and structure phasing of protein crystals at Structural Biology Center 19‐ID

A prototype of a 96‐well plate scanner for in situ data collection has been developed at the Structural Biology Center (SBC) beamline 19‐ID, located at the Advanced Photon Source, USA. The applicability of this instrument for protein crystal diffraction screening and data collection at ambient temperature has been demonstrated. Several different protein crystals, including selenium‐labeled, were used for data collection and successful SAD phasing. Without the common procedure of crystal handling and subsequent cryo‐cooling for data collection at T = 100 K, crystals in a crystallization buffer show remarkably low mosaicity (<0.1°) until deterioration by radiation damage occurs. Data presented here show that cryo‐cooling can cause some unexpected structural changes. Based on the results of this study, the integration of the plate scanner into the 19‐ID end‐station with automated controls is being prepared. With improvement of hardware and software, in situ data collection will become available for the SBC user program including remote access.     

山区智能视觉火情高空图像搜集系统的设计与实现

介绍了一种针对山区多样性突发火情事件中基于智能视觉的高空图像搜集系统,采用以ST意法半导体公司的STM32F107VCT6为处理核心的开发平台,地面控制平台通过高空无人机的高速照相机对目标区域火情图像数据进行搜集,并将图像数据带回到地面控制平台的PC处理器上进行综合分析。地面控制平台根据智能视觉信息采集模块采集的山区遥感图像的均值作为初始背景,并对背景图像进行实时更新,利用光谱特征与距离算法获取差分图像,并进行图像处理,从而获取山区发生火情区域的图像分析数据,以实现对山区森林突发火情事件的及时监测,在火情发生初始阶段就能扑灭。本文对山区智能视觉火情高空搜集系统的实现原理、核心硬件设计、系统软件设计等分别进行了研究,并通过系统实验进行了验证,测试结果表明,该系统在对山区的高空图像搜集实验中,对不同颜色物体的分别识别率为100%,对火灾与地形地貌的识别率为95.55%和81.12%,非常适用于各种山区环境下的智能视觉监控系统。     

统计数据采样算法

将集中式控制系统常用的结构二层结构改进为智能化的三层结构的设计方案,即传感器、智能巡检仪和上位机。上位机既可以直接读取传感器的数据也可读取智能巡检仪的数据。此方案较好地解决了二层结构所出现的问题,并且也适合交大规模的其它类型的控制系统。这种设计方案存在当规模时上位机采集数据出现丢失现象。本文提出了利用数据库的历史数据及控制曲线的线性特征的数据采集算法,较好地解决了数据丢失的问题。并以温控系统为例仿真了在较大规模控制环境下的试验结果。     

分级纳米材料的结构、制备及其应用

纳米材料因其独特的表面效应、体积效应和量子效应等特点,在化工、生物工程、医学和能源等领域有着广阔的应用。 由简单的低维纳米结构作为主要的构建单元并按照特定的排列方式组装成规整有序的三维结构,即分级纳米结构,已经开展了许多的研究。 本文综述了分级纳米结构的制备方法和微观结构,及其在污水处理、超级电容器、太阳能电池以及光催化等领域的应用。     

热荷载作用下Timoshenko功能梯度夹层梁的静态响应

在精确考虑轴线伸长和一阶横向剪切变形的基础上建立了Timoshenko功能梯度夹层梁在热载荷作用下的几何非线性控制方程.采用打靶法数值求解所得强非线性边值问题,获得了两端固支功能梯度夹层梁在横向非均匀升温作用下的静态热过屈曲和热弯曲变形数值解.分析了功能梯度材料参数变化、不同表层厚度和升温参数对夹层梁弯曲变形、拉-弯耦...     

Thermal fracture of a functionally graded/homogeneous bimaterial with system of cracks

The thermal fracture of a bimaterial consisting of a homogeneous material and a functionally graded material (FGM) with a system of internal cracks and an interface crack is investigated. The bimaterial is subjected to a heat flux. The thermal properties of FGM are assumed to be continues functions of the thickness coordinate, while the elastic properties are constants. The method of the solution is based on the singular integral equations. For a special case where the interface crack is much larger than the internal cracks in the FGM the asymptotic analytical solution of the problem is obtained as series in a small parameter (the ratio between sizes of the internal and interface crack) and the thermal stress intensity factors (TSIFs) are derived as functions of geometry of the problem and material characteristics. A parametric analysis of the effects of the location and orientation of the cracks and of the inhomogeneity parameter of FGM’s thermal conductivity on the TSIFs is performed. The results are applicable to such kinds FGMs as ceramic/ceramic FGMs, e.g., TiC/SiC, MoSi₂/Al₂O₃ and MoSi₂/SiC, and also some ceramic/metal FGMs.     

Mode III fracture of an arbitrary oriented crack in two dimensional functionally graded material

In this paper, a two dimensional functionally graded material (2D-FGM) under an anti-plane load with an internal crack is considered. The crack is oriented in an arbitrary direction. The material properties are assumed to vary exponentially in two planar directions. The problem is analyzed and solved by two different methods namely Fourier integral transforms with singular integral equation technique, and then by the finite element method. The effects of crack orientation, material non-homogeneity, and other parameters on the value of stress intensity factor (SIF) are studied. Finally, the obtained results for Mode III stress intensity factor of different methods are compared.